SORVIAN DNP Studio v1.3.0（2026-11-21）
=========================================

【中文】
1. 先安装 DNP 打印机驱动（DS-RX1 等），接好 USB、开机。
2. 双击「SORVIAN DNP Studio.exe」打开，不需要安装。
3. 第一次打开会有新手导览；任何页面按 F1 可以看使用说明。
4. Windows 若提示「Windows 已保护你的电脑」，点「更多信息」→「仍要运行」。
5. 使用「手机扫码上传」时，Windows 会询问网络访问，请点「允许」（只勾私人网络）。
6. 相纸：右上角可切换 6x4 / 6x8，要和打印机里装的相纸卷一致。
作品存在：图片\SORVIAN DNP Studio\作品；打印留底：图片\SORVIAN DNP Studio\打印记录
系统需求：Windows 10 / 11（自带的 .NET Framework 4 与 Microsoft Edge）

【English】
1. Install the DNP printer driver (e.g. DS-RX1), connect it via USB and switch it on.
2. Double-click "SORVIAN DNP Studio.exe" — no installation needed.
3. A short tour runs the first time. Press F1 on any screen for help.
4. If Windows shows "Windows protected your PC", click "More info" → "Run anyway".
5. For QR phone uploads, allow network access when Windows asks (private networks only).
6. Paper: switch between 6x4 and 6x8 at the top right — it must match the roll in your printer.
Requirements: Windows 10 / 11 (built-in .NET Framework 4 and Microsoft Edge).

https://dnp.sorvian.io · © 2026 SORVIAN
